China Factory High Temperature Compressed Gasket Sheet Non Asbestos Fireproof Fiber Board Non-Asbestos Sheet Pad
Our manufacturing facility specializes in producing premium compressed sealing sheets designed for extreme thermal conditions. Available in thickness specifications ranging from 0.5mm to 5.0mm, these engineered solutions maintain optimal performance when utilizing minimal thickness configurations for specific operational requirements.
Technical Specifications:
Material Composition: High-density composite formulation blending aramid polymers, synthetic mineral fibers, and oil-resistant elastomers through precision-engineered thermal compression molding. Demonstrates exceptional chemical stability against hydrocarbons (including petroleum derivatives), aqueous solutions, and gaseous media.
Performance Standards:
Three thermal resistance thresholds classified by product codes:
CSNXB150 | CSNXB250 | CSNXB350
(Numerical values indicate maximum continuous service temperature in °C)
Key Advantages:
● Multi-layered structural integrity prevents delamination
● Superior fluid impermeability with vibration adaptability
● Certified asbestos-free composition (ISO9001 UKAS validation)
● Cost-effective industrial sealing solution with high material utilization
Implementation Scenarios:
● Power transmission systems: Engine blocks, turbocharger assemblies
● Fluid handling infrastructure: Pipeline networks, pressure vessel flanges
● Mechanical drive components: Gearbox housings, compressor units
● Marine engineering applications
Customizable Dimensions:
Standard panel dimensions:
1500×1500mm | 1500×4500mm | 1270×3810mm
(Alternative sizes available through tailored cutting specifications)
Note: Technical consultation recommended for specialized application requirements to ensure proper material selection and performance optimization.
Physical Property:
| Items | CSNXB150 | CSNXB250 | CSNXB350 |
| Tensile Strength | Mpa | 7.0 | 8.0 | 10.0 |
| Compressibility | % | 7-17 |
| Recovery | ≥% | 40 | 45 | 50 |
| Creep relaxation | ≤% | 40 | 35 | 30 |
| Density | g/cm3 | 1.8±0.1 |
| Flexibility at room temperature | Bend 180°C on the rod with diameter which is 12 times of nominal thickness of the sample, no crack. |
| Immersed into ASTM 3# at 150ºC for 5h | Tensile Strength | MPa≥ | 5.0 | 6.0 | 7.0 |
| Weight Increase | ≤% | 30 |
| Immersed into ASTM B at21-30ºC for 5h | Thickness Increase | - | 0-20 |
| Flexibility | - | No crack |
| Working Temperature | Max/Continuous | ºC | 200/150 | 300/250 | 350/300 |
| Working Pressure | Max/Continuous | MPa | 2.0/1.0 | 4.0/2.0 | 5.0/3.0 |
Product Shows
Product Technical Details
As a general rule, Non-asbestos jointing gasket sheet is:
• Good for use with water
• Good for use with petrol
• Have good resistance to oil
Product Tags:
|
|
High Temperature Compressed Non Asbestos Gasket Material Fireproof Fiber Board Images
|
